Fast Solutions Of Water Damage Restoration – What’s Needed

Wonder what exactly repair water damage is? As you know, you have a big mess-and a big job-on your hands when your home is suffering water damage. After a flood, landslide, or other occurrence of water damage, the process of restoring your home to its pre-loss state is known as water damage reconstruction. Throughout the reconstruction phase of water damage, several main procedures take place: loss assessment, categorization of water based on contamination levels of the water source, drying and decontamination of the system and its contents, monitoring of the process and finishing.You can get additional information at restoration service.

This is first assessed before any repair work is undertaken, so that an acceptable response is taken. For starters, if you were considering purchasing and restoring a classic car, you would like to know exactly what you are dealing with and where to start. When it comes to water damage, not only must the technicians fully understand the task ahead of them, insurance companies are often involved. Not only does a repair water damage technician need to understand what is affected and what needs to be done, the damage needs to be thoroughly examined and recorded and reliable estimates made. It is also necessary to identify the cause of the damage so that necessary repairs can be made.

As part of the evaluation, water is classified according to its water source’s pollution levels (category 1, 2, or 3). For example, water damage from a clean source such as an overflowing sink is easier to deal with than a water source containing raw sewage. The categories are as follows: o Category 1-Water from clean sources such as sinks, pipes, and toilet bowls (without urine or feces) o Category 2-Water with some contaminants such as water from a washing machine, dishwasher, or toilet with urine (but no feces) o Category 3-Water that is extremely unsanitary, capable of causing severe illness or death if the water was ingested. Sources of Category 3 water include sewage, fece-containing toilet water, river floodwaters, and microbial-growing standing water.

Keep in mind that the water source may initially have been fairly clean and sanitary, but it can easily come into contact with unsanitary pollutants and transform into water category 2 or 3.

Water damage usually affects the contents not only of the immediate area but also of the house. Water damage repair technicians also have to treat water-affected furniture, drapes, carpets, appliances, books and other objects. Some of these contents will be relocated before the water reaches them in an attempt to prevent damage, others will have to be washed, cleaned and decontaminated and others will still be affected to the point where they have to be discarded.

Eventually, the process of cleaning, purifying and decontaminating begins. During this time, equipment such as blowers, scrubbers, subfloor drying equipment, and dehumidifiers are mounted and left with the drying process controlled for several days to ensure that all equipment is properly placed and working as it should. Humidity levels, temperatures, and moisture content of affected areas are controlled with continued additional drying when required. Mold inhibitors may be used in addition to drying, washing, decontaminating, to prevent mold from developing. Deodorizers may be required, too. Even if the water damage was from a Category 1 water source, contaminants in carpets and the underlying carpet pad can quickly lead to a foul odor.

More repairs may be needed, depending on the extent of the damage. For example, if the drywalls and carpet have been compromised to the point where they need replacement, such repairs would occur once the underlying areas are dry.