The tinting procedure for your car windows is not an easy job. In reality, it is difficult for even some professionals. At any rate, there is a five-step method that will make it easier for you to save some money in your own garage and do the tinting. This is how you can do it on your own and stain your own car windows. Any Acuras to BMW car models look super sleek with a crazy tint work. Phase one- Study the laws of the state on tinted windows. Common Mistakes Patients Make When Choosing A Dentist | Easy Living Mom has some nice tips on this. Certain states, especially black outs, do not allow certain levels of tint. Some states allow windows in the back to be darkly tinted, but not in the front of the car. Before you do it yourself, make sure that you know exactly what you are and that where you live is not allowed.Move two- Take care of your windows with extra care. You just want to ensure that the surfaces of your windows are clean. Check for chalking compounds or regions where there has been weather stripping and scrub these areas until they are spotless.Phase three- Cut the exact shapes of your windows and trace them. To cut out the original shape of the inside of your car windows, you can use nylon paper. Then, draw it on a sheet of film and put it on your window as you want your tint to match.
Phase four- Within, put the tint cover. You should put the tint sheet on it with some soap water added to the inside of your windows and take around a third of the film back. Next, spray an adhesive window solution with these tints. Be careful not to touch the film with your hands when you are doing this. Often, make sure the edges are lined up and that all air bubbles are worked out properly.Phase Five- Pat the solution down. Using a squeegee or paper towel to wipe down the solution until the sheet is perfectly spread out. Be sure to buff any moisture away. Work carefully so that you do not tear the film unintentionally.